Aeg-Electrolux BS9304001M User Manual download pdf (Page 17)

With Duration and End Time you must set the heating function and the temperature first.

Then you can set the clock function.

When you use the Core Temperature Sensor, Duration and End Time do not work.

Heat + Hold

You can activate or deactivate the function in the Basic Settings menu.

The Heat + Hold function keeps prepared food warm at 80°C for 30 minutes. It activates

after the baking or roasting procedure ends.

Conditions for the function:

• The set temperature is more than 80°C.

• The function Duration is set.

Activating the function

1. Activate the appliance.

2. Select the heating function.

3. Set the temperature above 80°C.

4. Press

again and again until the display shows Heat + Hold . Press OK to confirm.

When the function ends, an acoustic signal sounds.

The Heat + Hold function operates for 30 minutes.

The Heat + Hold function stays on if you change the heating functions.

Extra Time

The Extra Time makes the heating function continue after the Duration ends.

• Applicable for all heating functions with Duration or Weight Automatic.

• Not applicable for heating functions with Core Temperature Sensor.

Activating the function:

1. When the cooking time ends, an acoustic signal sounds. Press any sensor field.

2. The display shows the message for Extra Time for five minutes.

3. Press

to activate (or to cancel).

4. Set the Extra Time period. Press OK to confirm.

AUTOMATIC PROGRAMMES

WARNING!

Refer to "Safety information" chapter.

Assisted Cooking with Recipe Automatic

This appliance has a set of recipes you can use. Recipes are fixed and you cannot change

them.

Automatic programmes

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

No comments

Aeg-Electrolux BS9304001M User Manual Page 17