Aeg-Electrolux BS9304001M User Manual download pdf (Page 26)

Replacing the oven lamp:

1. You can find the lamp glass cover at the left side of the cavity.

Remove the left shelf support.

2. Use a torx 20 screwdriver to remove the cover.

3. Remove and clean the metal frame and the seal.

4. Replace the oven lamp with applicable 300°C heat-resistant oven lamp.

Use the same oven lamp type.

5. Install metal frame and seal. Tighten screws.

6. Install the left shelf support.

WHAT TO DO IF…

WARNING!

Refer to "Safety information" chapter.

Problem Possible cause Remedy

The appliance does not

heat up.

The appliance is deactivated. Activate the appliance.

The appliance does not

heat up.

The clock is not set. Set the clock.

The appliance does not

heat up.

The necessary settings are not set. Check the settings.

The appliance does not

heat up.

The Child Lock is activated. Refer to "Deactivating the Child

Lock".

The appliance does not

heat up.

The fuse is released. Make sure that the fuse is the

cause for the malfunction. If the

fuse releases again and again, re-

fer to an authorized electrician.

The display shows F111. The CT Sensor plug is not correctly

installed into the socket.

Put the plug of core temperature

sensor as far as possible into the

socket.

The oven lamp does not

operate.

The oven lamp is defective. Refer to "Replacing the oven

lamp".

If you cannot find a solution to the problem yourself, contact your dealer or the service

centre.

The necessary data for the service centre is on the rating plate. The rating plate is on the

front frame of the appliance cavity.

We recommend that you write the data here:

Model (MOD.) .........................................

Product number (PNC) .........................................

26 What to do if…

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Comments to this Manuals

No comments

Aeg-Electrolux BS9304001M User Manual Page 26

Comments to this Manuals

Related products and manuals for Unknown Aeg-Electrolux BS9304001M