Aeg-Electrolux F75500VI0 User Manual download pdf (Page 22)

Removing and cleaning the upper spray arm

1. To remove the upper spray arm, turn it

laterally.

2. Clean the upper spray arm under running

water.

3. To install again the upper spray arm, put it

in position and press.

Removing and cleaning the lower spray arm

1. Turn the fixing screw (B) counterclock-

wise.

2. Pull the lower spray arm off the shaft.

3. Clean the lower spray arm and the fixing

screw under running water.

4. Put the lower spray arm in position and

turn the fixing screw clockwise.

To clean the external surfaces

Clean the external surfaces of the appliance and control panel with a moist soft cloth.

Only use neutral detergents.

Do not use abrasive products, abrasive cleaning pads or solvents (acetone).

WHAT TO DO IF…

The start of the appliance does not occur or it stops during operation.

First try to find a solution to the problem (refer to the table). If not, contact the service

centre.

With some malfunctions, the display shows an alarm code:

•

- The appliance does not fill with water

•

- The appliance does not drain the water

•

- The anti-flood device is on.

WARNING!

Deactivate the appliance before you do the checks.

Malfunction Possible cause Possible solution

The appliance does not fill with

water.

The water tap is blocked or

there is limescale on it.

Clean the water tap.

The water pressure is too low. Contact your local water au-

thority.

The water tap is closed. Open the water tap.

The filter in the water inlet

hose is blocked.

Clean the filter.

22 What to do if…

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 63 64

Comments to this Manuals

No comments

Aeg-Electrolux F75500VI0 User Manual Page 22

Comments to this Manuals

Related products and manuals for Unknown Aeg-Electrolux F75500VI0