Aeg-Electrolux F88990VI User Manual Page 26

  • Download
  • Add to my manuals
  • Print
  • Page
    / 40
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 25
5. If you want to set options please refer to the "Washing programmes" chart to
be sure that the options are available with the selected programme.
6. Close the dishwasher door, the programme starts automatically.
Setting and starting the programme with delay start
1. After having selected the washing programme, press the delay start button
until the number of hours for the delay start appear in the digital display. The
start of the selected washing programme can be delayed for between 1 and 19
hours.
2. Close the dishwasher door, the countdown starts automatically.
3. The countdown will decrease with steps of 1 hour.
4. The opening of the door will interrupt the countdown. Close the door; the
countdown will continue from the point at which it was interrupted.
5. Once the delay start has elapsed the programme will start automatically.
WARNING!
Interrupt or cancel a washing programme in progress ONLY if it’s absolutely
necessary. Attention! Hot steam may escape when the door is opened. Open
the door carefully.
Cancelling a delay start or a washing programme in progress
Press the RESET button until 2 horizontal line will appear in the digital display.
Cancelling a delay start involves also the cancelling of the washing programme
set. In this case you have to set the washing programme again.
If a new washing programme is to be selected, check that there is detergent in
the detergent dispenser.
Interrupt a washing programme in progress
Open the dishwasher door; the programme will stop. Close the door; the pro-
gramme will start from the point at which it was interrupted.
End of the washing programme
The dishwasher will automatically stop and an audible signal informs you of the
end of the washing programme.
26
Select and start a washing programme
Page view 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 39 40

Comments to this Manuals

No comments