7
GB
Correct Lambda Sensor handling and usage
1. Connector
Keep clean and dry:
> Do not use grease or contact spray of any kind.
> Moisture and other foreign substances will easily influence the
Sensor.
2. Cable
Avoid heat:
> Keep free from the exhaust-pipe or other hot vehicle parts.
Avoid stress:
> Keep free from moving parts.
> Avoid cable tension.
> Avoid long, free-hanging cabling: it could start to swing or even
get caught by other parts or objects.
3. Sensor body
Keep clean:
> The back end of the Sensor contains holes, through which it
breathes to sample the outside air. These holes need to stay
open to enable the Sensor to function.
> Keep the Sensor body protected from dirt and sudden cold
water splashes.
> Do not spray the Sensor with high-pressure water.
> Keep the Sensor free from all types of coatings.
4. Sensor body thread
Grease the thread:
> Grease the thread with the supplied copper grease before
installation.
5. Sensor nose
Avoid sudden impact:
> Avoid any sudden knocks to prevent damage to the sensitive
ceramic element inside.
Avoid contamination:
> Avoid all possible contamination, by keeping the Sensor nose
free from foreign substances.
> Do not spray anything on the Sensor nose.
> Do not put grease on the Sensor nose.
> Avoid the use of leaded fuel.
> Avoid the use of fuel additives
Lambda Sensors Handling & use
1 2 3 4
5
Comments to this Manuals