Aeg-Electrolux L14950A User Manual download pdf (Page 32)

Problem Possible cause/Solution

Spinning starts late or the machine does not

spin:

The electronic unbalance detection device has

cut in because the laundry is not evenly distrib-

uted in the drum. The laundry is redistributed

by reverse rotation of the drum. This may hap-

pen several times before the unbalance disap-

pears and normal spinning can resume. If, after

some minutes, the laundry is still not evenly

distributed in the drum, the machine will not

spin.

• The laundry load is perhaps to little, add

more items, redistribute the load manually

and then select the spinning programme.

The machine does not dry or does not dry

properly:

The drying time has not been selected.

• Select the drying time.

The water tap is not turned on.

• Open the water tap.

The drain filter is clogged.

• Clean the drain filter.

The machine is overloaded.

• Reduce the laundry load.

The selected drying time or dryness degree was

not suitable for the laundry.

• Select the suitable drying time or the dryness

degree for the laundry.

The machine makes an unusual noise:

The machine is fitted with a type of motor

which makes an unusual noise compared with

other traditional motors. This new motor en-

sures a softer start and more even distribution

of the laundry in the drum when spinning, as

well as increased stability of the machine.

No water is visible in the drum:

Machines based on modern technology operate

very economically using very little water with-

out affecting performance.

The display shows the alarm code :

Anti-flooding system has activated.

• Pull out the plug from the power socket,

close the water tap and contact the Service

Force Centre.

The laundry is full of different colored fluff:

The fabrics washed in the previous cycle re-

leased fluff of a different color .

• The drying phase helps to eliminate some

fluff.

• Clean the clothes with a fluff remover.

In case of an excessive amount of fluff in the

drum run the special programme to clean it (re-

fer to “FLUFF IN THE FABRICS” for more details).

32 What to do if…

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

Comments to this Manuals

No comments