AEG Electrolux CaFamosa Operations Instructions download pdf (Page 13)

g

26

If the “Clean“ indicator (Figure 2/L)

illuminates, you should run the clean-

ing program as described below. Clean-

ing can also be carried out as described

below before the indicator illuminates.

You can continue to use your appliance

and run the cleaning program later.

However, in this way you will endan-

ger your rights to make a claim

under the guarantee, as the unit (and

thus also customer service) will detect

overdue cleaning!

0 Switch the appliance on using the On/

Off switch (Figure 2/B).

0

Press the “Flush“ button (Figure 2/K)

for approx. 3 seconds until the following

indicators illuminate: “Empty Spent

Coffee“, “Clean“ and “Ground

Coffee“ (Figure 21).

0 Fill the water tank to the maximum

mark, empty the spent coffee con-

tainer and drip catcher, and refit them.

0 The “Water Tank“ (Figure 2/N) and

“Spent Coffee“ indicators (Figure

2/O) go out.

0 Now place one original AEG cleaning

tablet in the filler opening for ground

coffee (Figure 1/B).

0 Now press the “Ground Coffee“

button (Figure 2/H), the “Ground

Coffee“ indicator (Figure 2/G) goes out.

The “Clean“ indicator (Figure 2/L)

flashes to show that the cleaning pro-

gram has started.

Note: The cleaning program can also

be started by pressing the “1 Cup“

or “2 Cups“ button!

Water is now pumped through the sys-

tem at short intervals to release, with

the aid of the cleaning tablet, residues

of coffee inside the machine.

0 If during the cleaning program the

“Spent Coffee“ indicator (Figure 2/O)

illuminates, empty the drip catcher and

the spent coffee container, refit them

and press the “Flush“ button (Fig-

ure 2/K). The cleaning program is then

continued.

This action may need to be repeated up

to four times.

0 The cleaning program is at an end

when the “Flush“ indicator (Figure

2/J) illuminates. Flush the appliance by

pressing the “Flush“ button (Figure

2/K).

0 Then empty the spent coffee container

and the drip catcher, and refit them.

The appliance is now ready for use

again when the “1 Normal Cup“

indicator (Figure 2/D) illuminates.

9. Descaling the Appliance

(Figure 22, 23)

Your appliance has a descaling pro-

gram for the regular descaling of the

appliance (duration approx. 60 min.).

If the “Descale“ indicator (Figure

2/M) illuminates, you should run the

descaling program as described below.

Descaling can also be performed before

the indicator illuminates by leaving the

appliance to cool down for 2 hours and

pressing the “Flush“ button (Figure

1/K) for approx. 3 seconds with the

appliance switched off. You can also

continue to use your appliance and run

the descaling program later. However,

you will endanger your rights to

make a claim under the guarantee,

as the appliance (and thus also cus-

tomer service) will detect overdue

cleaning!

Important: Only use liquid (not pow-

dered!), environmentally friendly des-

caler. Only use descaler exactly as per

the manufacturer's instructions. Do not

use any acid-based descaler.

0 Switch the appliance off using the On/

Off switch (Figure 2/B) and leave it

to cool down for at least 2 hours.

0 Fill the water tank with approx. 600 ml

of water, only then add the liquid

descaler (never the other way

round)!

Do not switch the appliance on!

0 With the appliance switched off, press

the "Flush" button (Figure 2/K) for

approx. 3 seconds until the following

indicators illuminate: "Empty Spent

Coffee", "Descale" (Figure 22).

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

Comments to this Manuals

No comments