AEG Electrolux CaFamosa Operations Instructions download pdf (Page 14)

g

27

0 Empty the spent coffee container and

the drip catcher, and refit them. The

“Spent Coffee“ indicator (Figure

1/O) goes out. All 4 green indicators

flash, the “Descale“ indicator (Fig-

ure 1/M) illuminates.

0 Place a sufficiently large container

under the swivelling nozzle (Figure 23).

0 Start the descaling program by turning

the selector dial (Figure 1/E) anticlock-

wise to the stop (Figure 16/A). The

“Descale“ indicator (Figure 2/M)

flashes.

Descaler is now pumped through the

system at short intervals.

0 If during the cleaning program the

“Spent Coffee“ indicator (Figure 2/O)

lights up, empty the drip catcher and

then replace it. All 4 green indicators

flash, the “Descale“ indicator illu-

minates (Figure 1/M).

0 Turn the selector dial (Figure 1/E)

clockwise back to the 0-position (Fig-

ure 16/B). The descaling program is

continued. If the “Spent Coffee“

indicator (Figure 2/O) lights up, empty

the drip catcher and then replace it. Do

not fill the water tank until the

"Water Tank" indicator (Figure 2/N)

illuminates.

After a period of time, the “Flush“

indicator (Figure 2/J) flashes while

the “Descale“ (Figure 2/M),

“Water Tank“ (Figure 2/N) and

“Spent Coffee“ indicators (Figure 2/O)

illuminate.

0 Now fill the water tank with fresh

water and refit it to the appliance.

0 Empty the drip catcher and refit. All 4

green indicators flash, the “Des-

cale“ indicator (Figure 1/M) illuminates.

0 Place a sufficiently large container

under the swivelling nozzle (Figure 23)

and turn the selector dial (Figure 1/E)

anticlockwise to the stop (Figure16/A).

The indicators “Flush“ (Figure 2/J)

and “Descale“ (Figure 2/M) flash.

After a certain amount of time, the

“Flush“ indicator (Figure 2/J)

flashes while the “Descale“ (Figure

2/M) and “Spent Coffee“ (Figure

2/O) indicators illuminate.

0 Empty the drip catcher and refit. Turn

the selector dial (Figure 1/E) clockwise

back to the 0-position (Figure 16/B).

The indicators “Flush“ (Figure 2/J)

and “Descale“ (Figure 2/M) flash. If

the “Spent Coffee“ indicator (Fig-

ure 2/O) lights up, empty the drip

catcher and then replace it. The descal-

ing program is continued.

After a certain amount of time, the

“Flush“ indicator (Figure 2/J)

flashes while the “Descale“ (Figure

2/M) and “Spent Coffee“ (Figure

2/O) indicators illuminate.

Empty the drip catcher and then

replace it. The “Flush“ indicator

(Figure 2/J) illuminates.

0 Flush the appliance by pressing the

“Flush“ button (Figure 2/K).

0 Rinse out the water tank.

The appliance is now ready for use

again when the “1 Normal Cup“

indicator (Figure 2/D) illuminates.

10. What to do if ...

• no coffee runs out of the spouts:

– Check that the water tank is cor-

rectly seated!

– Fill the water tank!

– Check the correct seating of the drip

catcher!

• coffee only drips out of the spouts:

– Set the grinding texture to a coarser

setting.

• too little froth is produced on the milk

during frothing?

– Always use cool, fresh (low fat) milk!

– Use a suitable container (e.g. jug)!

– Also cool the container if necessary!

– Dismantle the swivelling nozzle and

clean!

1 2 ... 9 10 11 12 13 14 15 16 17 18

Comments to this Manuals

No comments