Aeg-Electrolux B8871-4-A UK R07 User Manual download pdf (Page 48)

Cleaning and care48

Pyrolytic cleaning

1 Warning: The oven gets very hot during this process. Keep small children away.

1 Important! All removable parts including the side rails must be removed from

the oven before using the pyroluxe function.

3 If you use the oven shelf runners that are available as special accessories, these

must be removed before pyrolytic cleaning.

f the side rails/oven shelf runners are still in place, ‘C1’ appears in the time dis

play.

The pyroluxe process then cannot be started due to a safety cutout that pro

tects the side rails/oven shelf runners.

Pyroluxe

1. First remove the worst of the residue manually.

2. Select oven function Pyroluxe ® Cleaning .

– P1 appears in the temperature display.

– “3:15” appears in the time display,

– Cook time flashes for approx. 5 seconds.

Pyrolytic cleaning then starts.

3 The Oven Light does not work.

When the temperature set is reached, the door is locked.

The symbol is activated and the bars of the heat indicator light up, until the

door is unlocked again.

Changing the length of the Pyroluxe

1. Proceed as described in the section Pyroluxe

2. As long as Cook time is flashing select the desired length of the pyroluxe us

ing or :

“2:15” or “3:15”.

Cook time flashes for approx. 5 seconds.

Pyrolytic cleaning then starts.

3 If Cook time is no longer flashing, press the selection button Select

again and then perform the setting procedure.

3. When the pyroluxe is completed, press any button to end.

Changing the Pyroluxe switch off time

The Pyroluxe switch off time can be changed using the clock function End

time (within 2 minutes of setting the Pyroluxe).

When are the different pyroluxes set:

– 2:15 = Pyroluxe Quick: for a light degree of soiling

– 3:15 = Pyroluxe Intensive: for a high degree of soiling.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 67 68

No comments

Aeg-Electrolux B8871-4-A UK R07 User Manual Page 48