What to do if …56
What to do if …
Problem Possible cause Remedy
The oven does not heat up The oven is not switched on Switch the oven on
The clock is not set Set the current time on the
clock
The required settings have not
been set
Check the settings
The oven’s safety cutout has
been tripped
See “Safety fuse”
The fuse in the house’s electri
cal wiring (fuse box) has been
tripped
Check fuse. If the fuses trip re
peatedly, please call an author
ised electrician
The oven lighting is not
operating
The oven bulb is faulty Change the oven bulb
Pyroluxe is not working
(“C1” appears in the clock
display)
Side rails/oven shelf runners
have not been removed
Remove side rails/oven shelf
runners
The oven does not heat up.
Time is lit
Demo mode is on Keep Select button
pressed for 2 seconds, then
within 2 seconds press and
hold buttons Select and
for 2 seconds
F11 appears in the clock
display
The meat probe has short
circuited or the plug of the
meat probe is not firmly in po
sition in the socket
Insert the plug of the meat
probe as far as it will go into
the socket on the side wall of
the oven
F2 appears in the clock dis
play
Door not properly closed or
door lock defective
Close door properly;
Turn the appliance off and on
again via the house fuse or the
safety switch in the fuse box;
If displayed again, please con
tact the Customer Care De
partment
In the clock display there
appears a fault code that is
not listed above
Fault in the electronics Switch off the appliance via
the house fuse or the safety
switch in the fuse box and
switch it on again.
If displayed again, please con
tact your local Service Force
Centre
Comments to this Manuals